Monthly Archives: November 2011

Question: Ice Cream Sandwich and HTC Sense

So, I hear that HTC Sense is the flavor of Android to get. But when I saw a video of stock Android 4.0, a.k.a. Ice Cream Sandwich, I thought, “Who would want Sense?”

Source: Engadget

Source: SmartPhoneBlogging.com

So the question is, from what you see now, will you prefer your Ice Cream Sandwich plain? Or do you prefer your Ice Cream Sandwich to be Sense flavored? Let me know it the poll below.

Tagged , , ,

Leaked Lenovo Tablet

Lenovo Tegra 3 leak

This 10.1-inch Lenovo tablet looks pretty awesome, but where are the face shots? Whoever leaked this couldn’t get pictures of the front of the device. Hmmm . . .

Anyways, from what we can see of this tablet, it looks pretty awesome! Rumored to be running Android’s new Ice Cream Sandwhich OS, this purports to be a device to be reckoned with.

It is said to have include NVIDIA’s Tegra 3 T33 processor, along with 2gb . . . you heard that right . . . 2gb of 1,600MHz of DDR3 RAM. Lenovo also decided to throw in there a full-sized USB socket, which they also had included in their Thinkpad Tablet released not to long ago. And not to mention the fingerprint scanner.

Pretty awesome! I can’t wait to hear more about this tablet.

Source: Engadget

Tagged , , , , , ,

Changing a Wireless card in a Lenovo G560

This is a relatively easy task even for those not very technically inclined.

Tools: A small Phillips head screwdriver, a small flat head screwdriver, and a pair of small pliers. A small container is also preferred to hold loose screws.

First, begin by powering off the device, unplugging the power adapter, and removing the battery.

Now, there is a large panel on the bottom of the laptop, held into place by seven (7) Phillips head screws.

P1080594

Once you have removed those seven screws and placed them in a safe place, use the flat head screwdriver to pop up the panel, starting on the right side in the above picture. Be careful not to break any of the small clips holding it in place.

P1080595

Once you have removed the panel, set it aside somewhere safe. You should now see something similar to the below picture.

P1080596

In the above picture, the wireless card is in the top right of the large “hole” left by the panel. It has a small barcode on it, and black and white wires running vertically to it.

P1080597

With the small pliers, gently but firmly remove the two wires connected to the wireless card. Don’t worry, they just pop straight off.

P1080598

There is one small screw holding the wireless card down. Unscrew it and set the screw somewhere safe, you are going to need it.

P1080599

Gently pull the wireless card towards the center of the laptop until the connection comes loose.

P1080600

Then remove and set somewhere safe.

P1080601

Carefully unpack the new wireless card.

P1080602

From now on, we are basically doing the same steps in reverse.

Gently insert the new wireless card by sliding it into the connection. Look carefully before you start, there is only one way to insert it and you don’t want to break your new wireless card. Or the laptop for that matter.

P1080603

Now, screw in the small screw that you set aside.

P1080604

Now, using the pliers, carefully attach the wire connections. They go on straight down.

P1080605

Here, the new wireless card is completely attached.

P1080607

Now, replace the panel, making sure to press down all around the edges until you here it click in place and it is flush with the rest of the bottom.

P1080608

Now, screw in each of the seven screws.

P1080609P1080610P1080611P1080612P1080613P1080614P1080615

Then, reinsert your battery, plug in the laptop (if desired), and power on the laptop.

P1080616

There you have it!

Windows, or any other operating system, should automatically detect the new hardware and have it ready for use.

Tagged , , , , ,